We had a great weekend of hunting!
We had a great weekend of hunting!
Plot Watcher Pro
Being a long-time believer in game cameras, I was intrigued by the “plot watcher” time lapse cameras. I contacted Day 6 Outdoors and they were kind of enough to send me their Plot Watcher Pro for evaluation during whitetail deer season.
By Staff Writer: Charles Coker
Mike and I went out for 4 days of hunting in South Central Texas to run some gear through their paces..
How did it go?
My dad’s 22-250 he built in 1966 Sako short action mated to a Pre 64 Winchester stainless target barrel originally chambered in 220 Swift. A guy ordered it, changed his mind and my dad bought it off of him for 15 bucks! Cut it down to 22″ and rechambered in 22-250. Continue reading Dad’s custom Sako 22-250
By Staff Writer: Charles Coker
Growing up in South Texas and hunting whitetails down long senderos required aan accurate flat shooting rifle. 22-250, 243, 25-06 were all standards for those old deer camps. Truth be told, we didn’t use range finders, ranging reticles, etc.. As a young hunter if I saw a deer or hog I wanted, I just aimed and slowly squeezed the trigger and boom, down it went. “Watch it drop in the scope” was what we were taught by our dad. Confidence is everything. I didn’t really know or care if it was 75 yards or 300, if I thought it was “way out there” I held to the top of the hair. Of course, those were rifles carefully worked over by my dad, trigger jobs, glass bedded actions and meticulously worked up handloads. The 25-06 has long held a special place in my heart. After spending some time looking for the “right” one and not really finding what I was looking for, I contacted Mike Hudgins at Cooper…
For several years the venerable .243 has been used quite successfully for a youth hunting rifle, and as an adult, I have taken numerous deer and hogs with one.
My oldest son is 13 and has been using my old 1959 Sako that has been cut down to the proper length of pull. He has killed a few deer and hogs with it..
We spent the deer hunting season running the Leupold RX-1000i TBR Range Finder.
Unit performed flawlessly and is a TGR recommended product.
TGR is currently conducting a long-term field test of the Browning X-Bolt. Specifications:
They say faith in one’s equipment is everything..
Well, after a weekend of testing with a Nosler 280 AI and Zeiss FL 4-16×50 with AVS elevation turret, I would say I have it.
Deer weren’t moving where I was at on Sunday morning, and I had passed on several nice bucks Friday and Sat waiting for a shooter..
So I climbed up a big hill with a view of a field that’s about 3/4 of a mile square with scattered trees
I spotted a nice buck about 1/2 mile out headed for a tree line, no doubt, it was a shooter..
The 280 Ackley Improved cartridge has been around for quite some time as a Wildcat. Basically it has the same parent case (30/06) as the 270 Win, 25-06 Rem and of course, the 280 Rem. Ackely Improved means the shoulders are at a 40 degree angle making it hold a few grains more powder than the 280 and thus a little more velocity. The Ackley Improved rounds are generally thought of by those that like it as being extremely efficient, those that do not dismiss it as unneeded and a pain to deal with for a few extra FPS. Well, my take is they are both right. What the 280 AI does is get danged close to a 7mm mag in terms of velocity without the use of a belted case and with less powder, i.e., more efficient, similar trajectory with less recoil. I like a flat shooting rifle having grown up hunting senderos in deep South Texas, the 25-06, 243, 22-250 all were common around our hunting camps. As I started shooting more long range and really got the benefits of high BC bullets at extended ranges I started looking around at alternative hunting catridges. 7mm bullets have high BCs which translate into flatter shooting (in all honesty more noticable past 400-500 yards) with less wind drift. The 140g Nosler Accubond is travelling at 3150 FPS out of a 24″ barrel and out to 500 yards is just as flat as a 25-06 with a 100g bullet and with less wind drift, past 500 (more than I personally would hunt) the higher BC 7mm bullets start to really shine, guys are pushing well beyond 1K with 160 grain bullets. Continue reading Nosler Trophy Grade 280 Ackley Improved Review
Tikka T3: I was looking for a new deer rifle and kind of approached it differently this time. The first thing I did was to study the ballistic tables and the .270WSM really stood out. This cartridge can push a 140gr bullet at 3,100 fps – flat shooting. At 300 yards (with a 200 yard zero) it has about a 5.5″ drop, is moving at 2,600 fps, 2,100 energy delivery. Continue reading Tikka T3 Lite .270 WSM
I see it is time for me to render a comprehensive NVD evaluation for you guys. I am happy to do that. Let’s start with requirements:
1) Do you really need high resolution…enough so that you can tell the difference between a small pig and a raccoon, or a huge hog and a calf, at 100 or even 150 yards?
2) Do you need a variable gain feature? Will you be entering widely varied light fields? I.e, will you go quickly from the pitch blackness of the woods to the lights of a street or house?
3) Will you need magnification?. Will you need a reticle in the optic, or just a viewing device? Do you have experience with lasers? Are you familiar with infrared technology?
Let’s now supply some answers to the above:
1) If you need fine resolution, enough to tell the difference between small animals at ranges of around 100 yards, you need Gen III. If you are going to be looking around your yard, or walking around your deer lease, simply navigating in the dark, then Gen II will work fine. However, be aware that in very dark conditions, even Gen III usually also requires that you use some sort of IR illumination. The bottom line? If you can even remotely afford it, get the Gen III.
2) Variable gain is my favorite feature of the PVS-14. I lament the fact that my D-740 does not have it, and that cost me $4300 However, my D-740 is “auto-gated.” This means that when I suddenly enter a high light field, the tube cuts the receiving intensity by a sufficient amount to protect from damage to the reflector plate. This also means that you can zero the night optic at daytime without damaging the tube. The newer Gen III ITT Pinnacle model PVS-14’s are all autogated, and have a single battery. They are fantastic units, and can be purchased from Victor Dicasola at Tactical Night Vision company. I would not now buy a new PVS-14 if it were not autogated. Again, the bottom line is that Gen III is the top of the line in performance and if you can find a way to afford it, that is the way to go.
3) A D- 740 is a dedicated 4x or 6x (the D-760) night scope and has a reticle built in. You really cannot effectively move if from gun to gun, because no QD mounts are being made yet. You simply switch it on, and use it like a traditional scope. You can also get a Gen II SHP D-740, and this might be a good option for some of you. A PVS-14 is a monocular. The D-300 is a less expensive monocular. The MUM is a monocular of high quality with no variable gain feature.
There is no reticle in a monocular. There is no magnification. You will also need to buy the 3X magnifier separately. This means that you still need a sighting device to use it for a weapon. Take your pick. You can add the Aimpoint or Eotech NV compatibles for an extra $4-500. You can also go crazy with PEQ’s, and other such laser devices in the $1000-2000 range. Some of these setups require that you also buy a monolithic rail handguard so that you can move everything forward sufficient to get the NVD behind the sight. Again, if you buy a D-740, you simply strap it on the gun, zero and kill, kill kill.
IR illuminator. Do I need one?
If you hunt at night as much as I do….YES. About %70 of your hunts will be with extreme low light. Either a waning moon phase, or cloudy nights. If there is no moon, and low ceiling, no NVD performs very well, without some sort of IR illumination. MY D-740 is amazing in these conditions all things considered, but I still have to use the Torch IR (basically an IR LED flashlight). A Gen II with no IR illumination renders you blind on at least 50% of the nights you will choose to hunt, unless you never go out with anything other than full moon and clear skies…..yeah right. a Gen III with an IR illuminator gives you near impunity from dark conditions.
Some other things to consider:
1) if you put a NV compatible Aimpoint or Eotech on your rifles, and sight them in in the daytime….as long as you put them far enough forward,….you can now use the Eo in the daylight, then simply strap the PVS-14 on the gun behind it once the sun goes down and you don’t have to re-zero anything.
2) there is a UNI-mount which will adapt a PVS-14 to a dayscope / glass optic. This can work pretty well in certain circumstances, such as, when you don’t want to use an AP or Eo on a rifle for its daytime use, or, when you have high light (full moon) and you can get away with using high magnification.
2) Newer designs like the PVS-22 are generally restricted to LE sales right now, and are almost impossible to get. Cost is around $8000 if you get lucky, $10,000 if you buy retail. Yes, they are incredible and even beat the D-740 and PVS-14, but they are mounted in front of the optic so you don’t lose resolution and light transmission the way you do when the NVD has to be viewed through the glass of another optic… usually one that is not designed to “gather” light.
I hope this helps. Please feel free to email with specific questions, or book a hog hunt, and I will take you out and let you use my devices and my guns to kill a few pigs. Then you can decide what to buy.
For the purchase of new units: I highly recommend Victor from TNVC. He is a consummate professional and my dealings with him have been a pleasure. He has outfitted my operation with the best equipment money can buy.
For those inquiring about used / surplus/ refurb units, I can recommend Amerisurp, and American Electro Optics, Inc.
By: Chris Lucci
Wild River Ranch, LLC